Engine Adapter Plate, Cummins, 5.9 & 6.7, Rear, Billet Aluminum Accepts 164 Or 168 Ring Gear
PROFORMANCE PROS | Part# PPP-6628E
In Stock
Highlights:
- Engine Adapter, Rear 5.9 and 6.7 Cummins, PROFORMANCE PROS BOLT PATTERN, ACCEPTS 168 R.G.
- PROFORMANCE PROAS BOLT PATTERN IS THE SAME AS A BIG BLOCK CHEVY, EXCEPT THE LOWER HOLES ARE MOVE OUT A 1/2 INCH. THIS MAKES IT EASIER TO GET THE BOLTS IN.
- WITH BILLET STARTER NOSE (SDS-4405002) AND A TRICK BELLHOUSING YOU CAN RUN 168 TOOTH RING GEAR. YOU WILL NEED STARTER (PWM-9400)
- WITH A 8-5/8" DEEP BELLHOUSING AND A 4 DISC CLUTCH YOU WILL NEED THRO-OUT BEARING ASSEMBLY THAT IS A 13/4" O.A.L. BWL-2255-18W-134 AND BWL-BBL-5634-W-C
ENGINE ADAPTER PLATE, CUMMINS, 5.9 & 6.7, REAR, BILLET ALUMINUM ACCEPTS 164 OR 168 RING GEAR BB CHEVY / PROFORMANCE PROS BOLT PATTERN
$970.00
PPP-6628E
Proformance Pros
ENGINE ADAPTER PLATE, CUMMINS, 5.9 & 6.7, REAR, BILLET ALUMINUM, ACCEPTS 164 OR 168 RING GEAR BB CHEVY / PROFORMANCE PROS BOLT PATTERN
Engine Adapter, Rear 5.9 and 6.7 Cummins, PROFORMANCE PROS BOLT PATTERN, ACCEPTS 168 R.G.
PROFORMANCE PROAS BOLT PATTERN IS THE SAME AS A BIG BLOCK CHEVY, EXCEPT THE LOWER HOLES ARE MOVE OUT A 1/2 INCH. THIS MAKES IT EASIER TO GET THE BOLTS IN.
WITH BILLET STARTER NOSE (PPP-SDS-1054405002) AND A TRICK BELLHOUSING YOU CAN RUN 168 TOOTH RING GEAR. YOU WILL NEED STARTER (PPP-PWM-9400)
WITH A 8-5/8" DEEP BELLHOUSING AND A 4 DISC CLUTCH YOU WILL NEED THRO-OUT BEARING ASSEMBLY THAT IS A 13/4" O.A.L. ( BWL-2255-18W-134 AND BWL-BBL-5634-W-C )
For Assistance or Additional Information, Contact us at 906-639-PROS(7767)
Proformance Pros
ENGINE ADAPTER PLATE, CUMMINS, 5.9 & 6.7, REAR, BILLET ALUMINUM, ACCEPTS 164 OR 168 RING GEAR BB CHEVY / PROFORMANCE PROS BOLT PATTERN
Engine Adapter, Rear 5.9 and 6.7 Cummins, PROFORMANCE PROS BOLT PATTERN, ACCEPTS 168 R.G.
PROFORMANCE PROAS BOLT PATTERN IS THE SAME AS A BIG BLOCK CHEVY, EXCEPT THE LOWER HOLES ARE MOVE OUT A 1/2 INCH. THIS MAKES IT EASIER TO GET THE BOLTS IN.
WITH BILLET STARTER NOSE (PPP-SDS-1054405002) AND A TRICK BELLHOUSING YOU CAN RUN 168 TOOTH RING GEAR. YOU WILL NEED STARTER (PPP-PWM-9400)
WITH A 8-5/8" DEEP BELLHOUSING AND A 4 DISC CLUTCH YOU WILL NEED THRO-OUT BEARING ASSEMBLY THAT IS A 13/4" O.A.L. ( BWL-2255-18W-134 AND BWL-BBL-5634-W-C )
For Assistance or Additional Information, Contact us at 906-639-PROS(7767)
Categorized under:
· Valves
· PROFORMANCE PROS PARTS, KITS AND ASSEMBLIES » Drivetrain » Engine Plates » CUMMINS DODGE RAM
