WHEEL15X24-11''BS NBL 6x8.75bc 2 Outers
REAL RACING WHEELS | Part# REA-1524O-11BS-R106
Call to order (906) 639-7767
Call for custom bolt patterns/configurations
Availability, lead times, and pricing subject to change.
Wheel, 15X24-11"BS, NBL 6x8.75bc Made With 2 Outers
$0.00
Real 15" Wheel X 24" Width. This is a NON-BEADLOCK wheel and is for use where brake clearance IS NOT an issue. You must choose your required Stud Size and Bolt Circle Diameter.
This wheel is built with two outer halves and can interfere with brake clearances. MUST be used where brake clearance IS NOT an issue. You have a choice of three configurations; 10 Inch + 14 Inch, 11 Inch + 13 Inch and 12 Inch + 12 Inch. You must choose your preferred option. You should also choose the "Polish Inner Half" option for cosmetic reasons.
By building this wheel with two outer halves, it will be stronger, but you can only use this wheel where brake clearance isn't an issue. This wheel is typically used on the rear of a FWD pulling truck.
Custom built to your specifications-we can build these wheels to fit almost any application. These wheels are manufactured from 6061-T6 aircraft structural grade aluminum. 6061 aluminum must be two-stage heat-treated and therefore is more expensive to use, but much stronger than cheaper, non heat-treatable stamping type aluminum or plastic. They are Spun Constructed! It has been proven over and over again that the only way to get a truly round wheel and maintain material thickness, is to spin it!
Steel lughole insert proven to be better than coined or countersunk lugholes. The pressed in steel lughole insert ensures that the wheel will stay tight and bolt up true. Steel inserts are only used in applications utilizing an acorn style lugnut. For 3/4" studs (typical pulling size) no insert is used and a 3/4" flanged lugnut is recommended.
You must SPECIFY your BACKSPACE, BOLT CIRCLE, and STUD SIZE. All our wheels are polished to a finish that is second to none. The outer half comes polished, you need to choose if you want the inner half polished.
Repair parts & rim halves available.
For assistance or additional information, contact us at 906-639-PROS (7767)
This wheel is built with two outer halves and can interfere with brake clearances. MUST be used where brake clearance IS NOT an issue. You have a choice of three configurations; 10 Inch + 14 Inch, 11 Inch + 13 Inch and 12 Inch + 12 Inch. You must choose your preferred option. You should also choose the "Polish Inner Half" option for cosmetic reasons.
By building this wheel with two outer halves, it will be stronger, but you can only use this wheel where brake clearance isn't an issue. This wheel is typically used on the rear of a FWD pulling truck.
Custom built to your specifications-we can build these wheels to fit almost any application. These wheels are manufactured from 6061-T6 aircraft structural grade aluminum. 6061 aluminum must be two-stage heat-treated and therefore is more expensive to use, but much stronger than cheaper, non heat-treatable stamping type aluminum or plastic. They are Spun Constructed! It has been proven over and over again that the only way to get a truly round wheel and maintain material thickness, is to spin it!
Steel lughole insert proven to be better than coined or countersunk lugholes. The pressed in steel lughole insert ensures that the wheel will stay tight and bolt up true. Steel inserts are only used in applications utilizing an acorn style lugnut. For 3/4" studs (typical pulling size) no insert is used and a 3/4" flanged lugnut is recommended.
You must SPECIFY your BACKSPACE, BOLT CIRCLE, and STUD SIZE. All our wheels are polished to a finish that is second to none. The outer half comes polished, you need to choose if you want the inner half polished.
Repair parts & rim halves available.
For assistance or additional information, contact us at 906-639-PROS (7767)