Hitch Eye, Proformance Pros Custom
PROFORMANCE PROS | Part# PPP-5799
In Stock
Required HITCH EYE, PROFORMANCE PROS CUSTOM, 1 1/2" THICK W/FILLER PLATE -(2) 3/4-16 TAPPED HOLES ON SIDE AT HOOK CONTACT POINT. HITCH EYE IS 1 1/2 IN. THICK WITH 3"X3 3/4" HOLE. BUILD STREGTH THROUGH GEOMETRY.
Highlights:
- Part Number : PPP-5799
- Material : Steel
- Proformance Pros Hitch Eye
- 2 Bolt Holes 3/4"-16 Thread
- Ensures Hitch Will Not go Down
- 1.50" Thick
- 7" Long
- 10.25" Wide
- 6" Wide at Bolt Holes
- Oval Hole 3"X3-3/4
HITCH EYE, PROFORMANCE PROS CUSTOM, 1 1/2" THICK W/FILLER PLATE -(2) 3/4-16 TAPPED HOLES ON SIDE AT HOOK CONTACT POINT. HITCH EYE IS 1 1/2 IN. THICK WITH 3"X3 3/4" HOLE. BUILD STREGTH THROUGH GEOMETRY.
$230.00
PROFORMANCE PROS
HITCH EYE, PROFORMANCE PROS CUSTOM
Part Number : PPP-5799
Material : Steel
Proformance Pros Hitch Eye
2 Bolt Holes 3/4"-16 Thread
Ensures Hitch Will Not go Down
1.50" Thick
7" Long
10.25" Wide
6" Wide at Bolt Holes
Oval Hole 3"X3-3/4
Hitch eye by Proformance Pros
Our Hitch eye has 2 bolt holes that are 3/4"-16 thread and come in from the side at Contact point area.
When using a "Pyramid" design for the hitch and hitch adjusters you will help insure that your hitch does not go down . ( See drawing lower right above)
Our hitch eye measures 1 1/2" thick, 7" long, 10 1/4" wide at the widest point and 6" width at the bolt holes. The hole is oval shaped measuring 3" x 3-3/4".
For Assistance or Additional Information, Contact us at 906-639-PROS(7767)
