REA-1520-7BS-R106-OBL #1
REA-1520-7BS-R106-OBL #2

Wheel, 15X20-7'' Bs, 6x8.75 Bc, Obl


In Stock

Call for custom bolt patterns/configurations
Availability, lead times, and pricing subject to change.

Wheel, 15X20-7" Bs, 6x8.75 Bolt Circle, Outer Bead Lock



Real 15X20 Aluminum Wheel.

This is an OUTER BEADLOCK Wheel with the option to add an inner beadlock. You must choose your required BACKSPACE and BOLT CIRCLE DIAMETER. The 6X8.75 Bolt Circle with a 3/4" Stud, is the most common for the Rockwell & Military Hubs. Standard backspace available to ensure brake clearance can be from 6"-9" on this wheel. You also need to choose your Stud Size and whether you want the inner-half polished.

Where brake clearance IS NOT an issue, you can flip the wheel around with the outer half facing in. This can create up to a 14" backspace, depending on the backspace you order. The flipped backspacing is shown in parenthesis behind each backspace dimension. You should order the wheel with the "Inner Half Polished" option for cosmetic reasons if you will be flipping the wheel to gain additional backspacing.

Custom built to your specifications-we can build these wheels to fit almost any application. These wheels are manufactured from 6061-T6 aircraft structural grade aluminum. 6061 aluminum must be two-stage heat-treated and therefore is more expensive to use, but much stronger than cheaper, non heat-treatable stamping type aluminum or plastic. They are Spun Constructed! It has been proven over and over again that the only way to get a truly round wheel and maintain material thickness, is to spin it!

Steel lughole insert proven to be better than coined or countersunk lugholes. The pressed in steel lughole insert ensures that the wheel will stay tight and bolt up true. Steel inserts are only used in applications utilizing an acorn style lugnut. For 3/4" studs (typical pulling size) no insert is used and a 3/4" flanged lugnut is recommended.

The bead lock rings have registers to center the tire to the wheel. To obtain proper clamping force, it is recommended that you install a spacer ring with a beadlock. To get the proper spacer ring thickness, please choose your bead thickness if you choose to add a spacer ring.

You must SPECIFY your BACKSPACE, BOLT CIRCLE, and STUD SIZE. All our wheels are polished to a finish that is second to none. The outer half comes polished, you need to choose if you want the inner half polished. It is also recommended that you use bolts in every hole on the beadlocks for use in pulling applications; they come standard with bolts in every other hole.

Repair parts & rim halves available.

For assistance or additional information, contact us at 906-639-PROS (7767)

Categorized under:
  · Valves
  · Valves